Pro 5ft. USB to RS485-RS422 FTDI Chip

•Compatible with: Windows 7 32/64, Vista 32/64, Server 2003/8, XP 32/64, 2000, ME, 98Se, Mac and Linux
•Indication LED's for Power, TX and RX
•Plug and Play USB to RS485 Converter
•No power supply needed
•No IRQs, DMA or required. No IRQ Conflicts
•5 feet (1.6 meter) cable
•Baud rate: 300bps to 1Mbps
•USB 1.1 and 2.0 compliant
•Automatic send data control
•Auto detection of data speed
•Zero delay automatic transmission
•Built-in static and surge protection up to 600W
•Terminal board included with each converter

Standard  USB1.1/2.0, EIA RS-485, RS-422 standard  
USB signals  VCC, DATA+, DATA-, GND, FG  
RS-485 signals  D+, D, GND  
RS-422 signals  R+, R-, T+, T-, GND  
Working format  Asynchronous, point to point, point to multi-point, half duplex  
Flow control  Automatic Send Data Control - no drivers needed  
Baud rate  300-921.600bps, automatic test signal rate  
ESD Protection  600W surge protection, 15KV static electricity protection  
Serial connector type  RS-485 / RS422 side DB-9 male or optional terminal block  
USB connector  Type A Male  
Power consumption Static consumption less than 80mA, dynamic average consumption less than 150mA  
Dimensions  70mm x 35mm x 18mm